Town & Country 2000-2001-2002-2003
Voyager 2000-2001-2002-2003
Pacifica 2003
Prowler 2000-2001-2002

NOTE: One programmed remote transmitter must be available for the following procedure to operate.

    Obtain all remote transmitters.

NOTE: Any existing remote transmitters not used during programming will become inoperative.

    Switch ignition ON.
    Using a programmed remote transmitter proceed as follows:
    Press and hold remote transmitter UNLOCK  button for up to 10 seconds.
    After holding the UNLOCK button for 5 seconds, press remote transmitter PANIC button and release
    both buttons at the same time.
    Ensure acoustic signal is emitted indicating programming mode active.
    Within 30 seconds carry out the following procedure for each remote transmitter:
    Press and release remote transmitter LOCK and UNLOCK buttons at the same time, then press any
    remote transmitter button.
    Ensure acoustic signal is emitted after each remote transmitter operation.
    Switch ignition OFF or wait 60 seconds to exit programming mode.
    Ensure final acoustic signal is emitted.
    Replacement remote transmitters can also be programmed using diagnostic equipment