Small Decal/Graphic Installation

For small graphic installation (6" x6" or so), say on your car/truck or other item, applying a graphic is simple and can be done with household items.

1. First, clean the surface and let fully dry before applying the decal.
2. After the surface is completely dry, place your decal on a flat surface such as a table, face down.
3. Peel the backing off away from the decal and the premask.
4. Touching only the premask (not the decal), place on the surface you would like to apply the decal.
5. Using ideally a squegee (if unavailable a drivers licence can work) make sure there are no air bubbles in your decal.
6. Peel the premask off of your decal.

If you did end up with air bubbles in your decal it's not ruined. Take a pin and pop a hold in the middle of the air bubble. Using your finger or again the squegee, press the air out of the bubble from one side at a time. You can start on the right side and press firmly moving left until you reach the air bubble and vice versa from the left side.

As always, feel free to contact us with questions.

Thanks, Nick

TNTVinyl.com