If you own a 6.5L diesel, you probably love the truck - great fuel mileage, ride, and the smell of diesel fuel, but sooner or later, you will probably run into the infamous 6.5 stalling. What does if look like? Well, most commonly the truck just shuts off going down the road, just like somebody reached over and shut off the key. As soon as you coast over to the roadside, you can put it in neutral and start right back up!

As the situation progresses, it will eventually take longer to start until the point where you have to call your favorite towing company to get a lift back home.

At home you get on the internet (Ebay of course) and come here to find out that 9 times out of 10, the problem is the PMD or pump mounted driver. The offending object is a black box, about the size of a pack of cards, screwed right to the side of the injection pump. Simple enough, go buy one and screw it to the side of the injection pump and you're off again. But wait, it takes several hours to do this procedure since you must remove the intake manifold which is held down seemingly a million different ways and sometimes even loosen and rotate the injection pump which messes up the timing.

Enter the solution from Ebay seller accuratediesel.com! We offer the FSD heat sync kit which comes with a brand new FSD heat sync as well as a new PMD with calibration resistor already installed. 

The FSD kit allows you to get a new PMD installed in 15 minutes with the added benefit that you can expect longer life out of the now-cooler PMD.

If perchance the new PMD does not fix your problem and you need a new injection pump, just order an injection pump from us. We will sell you an injection pump without the PMD. That way you are not out any extra money if the PMD does not fix it.

We have many other items for the 6.5L diesel in our Ebay store. Check us out at the link below and don't forget to add us to your favorite sellers. Feel free to e-mail with your questions. We are glad to help!