HI, THESE MIRRORS PART # 1450 DO NOT, AND I REPEAT THAT DO NOT FIT, INTO THE OEM ORIGINAL HANDLEBAR LEVER HOLE. YOU NEED TO BUY AN ADDITIONAL CLAMP ON THE HANDLEBAR FOR THEM TO GO ON. EVEN THAN NOTHING AND I MEAN NOTHING GOES IN THAT LEVER THREADED HOLE.THINK ABOUT IT, BEFORE YOU BUY THEM. I BOUGHT THEM FROM A SELLER ON EBAY, THEY SELL MANY MOTORCYCLE ITEMS FROM KURYAKN.,AND THEY DIDN'T TELL ME THIS, NOR WAS IT LISTED ANYWHERE WITHIN THE ITEM LISTING.I EVEN ASKED, THEY SAID ALL ADAPTORS WERE INCLUDED AND THEY WOULDN'T CHARGE ME FOR ADAPTORS THAT SHOULD COME WITH THE MIRROR'S THAT WOULD BE NEEDED TO MAKE SURE THEY GO ON THE BIKE.

WELL ,THAT WASN'T THE CASE, YOU DECIDE.LATER I FOUND OUT ,THE ADAPTORS NEEDED THEY DO SELL FOR $12.EACH. THE KURYAKN WEB SITE SELLS THEM FOR $10 EACH.AGAIN YOU DECIDE.

REMEMBER ASK QUESTIONS, AND I DID, EVEN GAVE A POSITIVE FEEDBACK, BEFORE I REALIZED THEY WOULDN'T FIT IN THE ORIGINAL SPACE, WHERE THE MIRRORS WERE MADE TO GO. THEY GAVE ME THERE LINK TO BUY THE HANDLEBAR CLAMPSWITH A THREADED HOLE WHERE THE MIRRORS SKREW INTO. THAT IS HOW THEY GO ON THE BIKE.TO ME THAT IS TOTALLY UNACCEPTABLE. WHY? THEY GO IN FURTHER ,SO THEY ARE BLOCKED BY YOUR BODY, RENDERING THE USE OF THE MIRRORS USELESS, IN MY OPINION.

I'M TELLING ANYONE WHO READS THIS SO THEY WILL BE ADVISED OF THIS, BEFORE YOU BUY. IF I WOULD HAVE KNOWN THIS BEFORE HAND I WOULDN'T HAVE BOUGHT THEM. HOPE THIS GUIDE /REVEIW HELPS, IN YOUR DECISION TO BUY.REGARDS,MIDLIFECRISIS321

"EDITED IMPORTANT UPDATE"    !!!!!!!!!!!!

 I SEACHED AND FOUND OUT THAT YOU CAN GET A KURYAKYN PART # 1446. 2 SHOULD COME IN THE PACKAGE. THESE SHOULD BE, A 2TYPE THREAD 1 SIDE OF THIS BOLT TYPE SHOULD SKREW INTO THE EXISITING HOLE ON THE LEVER AND THE OTHER SIDE OF THE BOLT, THOSE THREADS SHOULD BE FOR THE KURYAKYN MIRROR ITSELF.

I ORDERED THEM TODAY 3/20/07 WE SHALL SEE.

IF IT WORKS , YOU WON'T SEE ANOTHER UPDATE.

THAT MEANS THIS WORKED.