Unlock Code Instructions for HP iPAQ Cell Phones for All Networks

In this guide I will show you how to enter unlock codes into your HP iPAQ cell phone so that it will be unlocked from your current provider such as Cingular AT&T, T-Mobile, Rogers, etc. First you need an unlock code of course. If you don't have an unlock code yet, please visit my store unlock-cell-phones, select the correct store category, and then order an unlock code. No cable or software needed! Just enter the code that you will receive from me and you'll have an unlocked HP iPAQ cell phone! Unlocking by entering a code on your phone's keypad is called "unlock by imei". Indeed, it is the most convenient way to unlock your cell phone.

PLEASE NOTE: IF YOU FIND THIS GUIDE HELPFUL, PLEASE MAKE SURE TO CLICK "YES" AT THE BOTTOM OF THIS PAGE. YOU WILL HELP FELLOW EBAYERS TO FIND THIS GUIDE FASTER.

Below are instructions that work for most network providers.

How to Enter Unlock Codes on HP iPAQ 6320, 6325, 6510, 6515:

1. Switch ON the mobile with a sim card that is not accepted.
   
2. The phone will prompt you for an unlock code.
3. Enter the unlock code, which you can buy in my store unlock-cell-phones.

How to Enter Unlock Codes on HP iPAQ 6315:

1. On the Today screen, tap Start > Settings.
2. Tap the phone band icon and choose " North America" or "Europe" or "Asia" phone band depending on where you are.
3. Tap the keyboard icon to open the virtual keyboard
4. Tap shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code, which you can buy in my store unlock-cell-phones, and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
   -Unlock successful.
   -Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
   -Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
   
9. Try to make a call. If you can call, your phone is unlocked. If you can't make a call, then please contact me and I will provide you with further instructions.

 

Questions? I'm always here to help. Please contact me through eBay.

Insider-Solutions sells cell phone unlock codes for the most models and carriers on eBay, including:

• Cingular AT&T
• T-Mobile USA
• T-Mobile UK
• 3G UK
• Vodafone UK
• Vodafone Australia
• Movistar Spain
• Orange Spain
• Orange France
• Bouygues France
• SFR France
  

I can even unlock Nokia BB5, Sidekick, and Hiptop by unlock code!

Our codes work for brands such as Motorola, Blackberry, Samsung, LG, Sony Ericsson, Sidekick, Hiptop, Nokia, Pantech, Audiovox, Smartphones, HTC, Modelabs, Goodlink, Handspring Treo, Palm Treo, Siemens, HP, and Alcatel.

I also sell discounted and alternative software as well as computer repair tools in my eBay store.