So you want a really cool sign for you bar but not sure whats your best bet.

Signs come in all sizes and shapes.From multi colored to natural, you can find just about any type of sign you may want.

Some signs are made from plywood.When sealed properly and maintained can last a long time.While others may be made from solid wood which tend to hold up better in the elements when finished properly.Hardwoods have a tendency to crack over time.Not much can be done to eliminate this.When cracks surface it is a good idea to spray on or brush on a coat of exterior sealer to seal the wood and keep moisture out.Most all may tend to warp over time.Look for signs which are made for exterior use when antisapating displaying outdoors.Some signs do not specify and may be damaged if used in the elements.Ask before making your purchase.

Look for signs with extra reinforcements on the back for stability and long lasting durability.If purchasing a custom made sign.Ask the seller to include the extra supports.In most cases you will not be charged any additional fees for your request.Be sure to ask about personalization for you new sign.Many such as TikiIslands will customize for free.While most may not advertise this,it never hurts to ask.We make all our signs one at a time.Therefore we can personalize for free without charging any additional fees,provided your request are reasonable.Be sure to read all the print before making your purchase.Some signs are ready made and mass produced.Many of these signs are made from press board.Ok inside, but very unreasonable to expect them to last outdoors for any length of time.

Be sure in any event your sign is finished with quality exterior coatings.This helps insure your product will last for a long time.If you find a sign which is not prefinished with a HD coating for exterior use.You can  apply the finish yourself.Brushed on is the best and is applied in lawyers.Let dry between coats and never attempt to apply one heavy coat.Wait for a warm day and let air dry outdoors in a protected area.Free from dust if possible.You can use spray on applications which also hold up well and are very cost efficient.Apply several coats waiting inbetween each coat.Always apply any finishes in a well ventalated area and wear the proper protection as indicated on most manufactures products.

Protect your sign and it will give you years of enjoyment.