About Projection Lights Lamps Bulbs

Thanks for Stopping By Cyndee$Attic  : )

 I hope you Find This *Guide Helpful I have done quite a bit of research but I AM NOT an EXPERT

the Manufacturer of Your Equipment is the PRO

 Here are some factors that could result in short life of a lamp..

How you handle your Lamp/Bulb & Equipment directly relates to the proper operation & Life of the lamp

The Lamps you Purchase from my Store  Cyndee$Attic 

Are all Cleaned & Electronically Tested (Except ARC & GAP Filament Mini Submini Lights)

before being Professionally/Carefully packaged  shipped Extremely Fast Directly to you

• Before installing bulb, Visually check inspect bulb for damage. 

• Carrier Damage may result no matter how perfect a packaging job!

• ~~When in doubt INSURE  it

•  DO NOT TOUCH EVER GLASS with bare fingers. This accounts for 95% of Bulb Failures use a soft cloth paper towel (or wear cotton gloves)

• If you have inadvertantly touched the Glass,  take the time to carefully clean it with a Good Glass Cleaner or Alcohol on a soft Cloth

•  Handle lamp with clean dry towel (or cotton glove). I mention this but most people do not put on gloves

•  Also, make sure bulb is warmed up /or cooled down to room temperature before installing.

•  Be Sure The Power is OFF on your Equipment

•  Be sure the fan is operating properly and your projector is free from dust.

• When used , bulb may shatter or explode if very cold, or if it contains fingerprint oils or moisture.

• The bulb also may develop a HOT SPOT or bubble  where you may have touched it

• This is especially a concern for Halogen and high wattage/temperature bulbs.

•  Be sure and use the correct manufacturer's replacement lamp per your Equipment guide I will be glad to assist in finding YOUR application

• (I do not beleive in Substitutions that's like putting Vegatable oil in your engine's crankcase)

• If you find a lamp that looks  like your lamp it's a good start to locating the right lamp

•  Email thru Ebay with whatever info you have & we WILL  Find YOUR CORRECT LAMP

• NEVER Just Go by the Photo there are too many Variables... when in Doubt ASK..  it's FREE!

•  NOS lamps have no determined life expectancy!  No one can predict the Life expectancy of a lamp Not Even the manufacturer

• Voltage plays a major roll in the life of a lamp.. power surges turning the lamp on & off all shorten a Lamps life

• IMPACT : do not hit the projector  or the lamp.  Force can damage the alignment of the lamp causing it to not function properly or damage the filament

• I do not illuminate any Projection Lamps as it causes carbon to the filament they become brittle and they do not transport well

• We Carry many Brands of Lamps SYLVANIA Lamps are Usually available for more $

If you have any questions Please Contact me using the EBAY LINK ask seller a question

We would be Glad to assist in Finding the Correct Lamp for your Needs be it :

Overhead Transparency Opaque

Microfilm AV Photography Enlarger Darkroom Photo Modeling

DJ  Display Stage Studio TV Night Club Disco

Theatre Lighting

Surgical Medical Dental Scientific Microscope

Automotive Aviation Watercraft Nautical

Instrumentation Appliance Musical Equipment Amplifiers Pilot  Miniature Test Lamps Bulbs

 Old & New type Neon Glow Lamps NE-45 NE45 B7A (Vintage)

Radio Indicator Dial Lamp Short Fuse Hikock Tube Test Replacement Glow Shorts Indicators

Vintage Replacement Bulbs

Out of Stock Discontinued Hard to Find Rare Vintage Obsolete

 Collectible Novelty Pinball Slot Machine Gaming  

Educational Instructional Training

• and a whole lot more : )