i would rate this product satisfactory and would recommond something better.  here are two down sides i noticed when using this product. (on my cbr600rr 06)

1.  one of the legs i connected to the arm (body) wasn't tight so it kept moving about half an inch back and forth after bolting it very tightly. (this might have just been mind).  even though it has two wheels on one leg it made me less confident it would hold up my bike without falling.

2. those rubber covered pieces were too long for my bike.  so if you set your front fork (front tire of your bike) flushed against the bike wheel you can't pull your tire off easly because it keeps hitting the disk brakes.

this product definite does the job and its one of the cheaper stands out there it seems, but if i knew the draw backs i would have bought something 20 dollars more expensive.  but i haven't used any other stand so i can't really compare.  hopefully this will help someone decide if this product is worth it.

i will probably drill a new hole on the leg to the arm so it won't move and cut the rubber/metal pieces that holds the fork so i won't have number 2 issue.