To setup the Q:

   1. Dial ##342587
   2. Enable Dial-Up Networking
   3. Go to Start, Accessories, Modem Link
   4. Make sure that "USB" is selected under "Connection"
   5. Select "Activate"
   6. Download the driver Here studentwebs.kings.edu/andrewkonopczyk/gadgets_stuff/apps_tools/moto_q/qdriver.zip
   7. Plug in the Q.
   8. When the New Hardware Dialogue appears, select "Install from a specific location" and point to the folder you have stored the driver.
   9. Clicking "Next" a few times will complete the installation.

To prevent the phone from locking up, you have to do these steps in this order.

    * When you go into the "Modem Link" program, you will select Activate and then Done. The Q will return to the home screen.
    * Plug in your USB cable. Tether.
    * When done, disconnect the DUN connection on the computer side and wait for it to be clearly gone.
    * Reopen the Modem Link program and select "Deactivate".
    * The hourglass thingy will appear. Once the status reads "Inactive" select done.
    * The Modem Link program will exit and now the Q will function in
    * Activesync mode again as normal.
    * Enjoy