From collectibles to cars, buy and sell all kinds of items on eBayWelcome! Sign in or register.
aAdvanced Search

Reviews & Guides

Write a guide

Minimus 7 Upgrade Kit Reveiw

by: wolverine-gulo-gulo( 3485Feedback score is 1000 to 4,999) Top 1000 Reviewer
8 out of 10 people found this guide helpful.


RADIO SHACK REALISTIC

Award Winning Minimus 7

Upgrade Kit (Zobel Network Crossover) Reveiw



There is a seller litekeys on ebay who sells Upgrade Kits for Realistic Minimus 7 speakers.

First, let me say that the seller has set you up for an easily installation with everything ready.

I did two sets of Wood Minimus 7s and two sets of Black Metal.

SINCE THE TWEETER, WOOFER  AND REAR CONNECTION PLATE CAN ALL BE UNPLUGGED LEAVING THE EMPTY CABINET YOU CAN PERFORM THE WORK EASIER  ON THE OUTSIDE, THEN RE-INSTALL THE WIRED ASSEMBLY BACK IN THE ENCLOSURES.

For the wood enclosures, there are two types made in Japan. One had everything on the speaker L-R bracket so you removed the
woofer/tweeter, the sound insulation and the 4 screws holding the L-R bracket on the back. Cut the Capacitor in place re solder the assembly and the Upgrade Board is glued on the inside rear above the L-R bracket.



The second wood speakers were older, the have a large bracket on the inside back with a huge coil. The bracket is bolted on the inside. You can remove it and add the kit then re-install the assembly. The
Upgrade Board glues to the left side on this one because the bracket with a huge coil is in the way.



The metal cabinets made in Korea have the
L-R bracket like the first wood one I mentioned. With woofer/tweeter and L-R bracket removed you install the assembly. The Upgrade Board is glued to the right side because the back molding studs.



The glue you'll use is Polyurethane. It bonds when the surfaces are damp. This glue expands as it cures so get ready to hold it down as it does. Also with this glue the kit board slides around like it's on grease. Make sure your board is horizontal and push it down when it starts to expand. It turns a yellow color. This is the best glue for the Job. Elmer's or Gorilla glue, both the same. It's better if you can prepare a weighted object to hold the Upgrade Board in place.

ALSO ADD MORE INSULATION, THERE IS SUCH A SMALL AMOUNT INSIDE

The speakers become more warm, tinniness disappears, an excellent upgrade.

                                  


Guide ID: 10000000006052403Guide created: 03/07/08 (updated 08/12/08)

 
Was this guide helpful? Report this guide

Ready to share your knowledge with others? Write a guide



 


eBay Pulse | eBay Reviews | eBay Stores | Half.com | eBay Express | Reseller Marketplace | Austria | France | Germany | Italy | Spain | United Kingdom | Popular Searches
Kijiji | PayPal | ProStores | Apartments for Rent | Shopping.com | Skype | Tickets


About eBay | Announcements | Security Center | eBay Toolbar | Policies | Government Relations | Site Map | Help
Copyright © 1995-2008 eBay Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.
eBay official time