MATERIALS NEEDED:

1-2/3 yards of two coordinating fleece prints and/or solids
Sharp fabric scissors or pinking shears and/or a rotary cutter, mat and ruler
Quilting or safety pins
Masking tape

INSTRUCTIONS:

1. Lay one piece of fabric on your work surface with the WRONG side up & with the salvages on the left and right side. Lay the second piece of fabric RIGHT side up on top of the first fabric, with the salvages on the top and bottom. This will stabilize your blanket.
2. Remove salvages and trim fabric to a 58" square. Use a few safety pins to hold the pieces together. Place masking tape on all sides of the top piece of fleece, four inches from the edge. Cut fringe at one inch intervals, using the masking tape as a guide. You may use scissors, pinking shears, or your rotary cutter and a mat.
3. Tie the top and bottom layers in a knot at each fringe.  At the corners, cross over the fringe so the bottom right connects to the top left.