Below is a list of nearly every part necessary for installing a K-Series motor into your Honda Civic or Acura Integra

ENGINE/TRANNSMISSION (All gaskets/seals are considered wear items and should be replaced)
----------------
K-series engine (K20 / K24)
K-series transmission (RSX-S / RSX Base / RSX Type-R / Civic Si)
K-series engine harness (RSX-S 02-04 / Type-R 02-04 )
K-series charging harness (RSX-S 02-04)
K-series Alternator (For Engine of Choice)
K-series Starter (For Engine of Choice)
K-series ECU (RSX PRB 02-04) + Hondata K-Pro (Or JDM K-series ECU since these have no immobilizer)
CRV Passenger side engine mount (needed for non-CRV K24 swaps)
K20 Swap Header (DC Sports / Hybrid Racing)
Clutch + Flywheel (02-06 RSX-S)
RSX Type-S Oxygen Sensor (02-04 Primary)
RSX Type-S Knock Sensor (Only if not using RSX-S engine, or repin stock Knock sensor)
RSX Type-S Clutch Slave Cylinder
RSX Type-S Halfshaft/Intermediate Shaft
RSX BASE Axles (For EG only, Swap inner joints) Or...
RSX-S Axles w/ B-series 32mm Outers (For EG again, Also rec. swapping inner joints)
RSX Type-S Throttle Body (Or Accord throttle body, depending on engine/intake)
RSX-S Intake Manifold (Or RBC / TSX / Accord)
Karcepts Throttle Body Adapter (only if using RBC)
Engine Mounts (Hasport / Hybrid Racing )
Harness Conversion (Hasport / Hybrid Racing / Sparkks Racing)
Clutch Line (Hybrid Racing )

RADIATOR/COOLING (This is for using stock Civic half-size radiator)
-----------
Coolant Hose Adapter (MFactory / Hasport / Hybrid Racing) and re-use Stock B/D series Fan switch and coolant temp sensor
Mishimoto 10" Electric Fan
Mishimoto 1992-2000 Honda Civic SOHC Radiator (for half-size applications)
TOP Rad Hose - Use a RSX Type-S Top Hose (for EK/EG)
BOTTOM Rad Hose - Use a 1999-2000 Civic Si Top Hose (for EK/EG)

SHIFTER PARTS
-----------
Karcepts Shifter mounting kit (for EG/EK/DC2)
RSX Type-S Shifter Box (OEM / Buddy Club)
RSX-S 2002-2004 Shifter Cables (OEM / Hybrid Racing)
Shift Parts to Connect Shifter Cables (OEM)

EXHAUST PARTS (Must be custom welded)
-----------
Kteller 2.5" or 3" Stainless Piping
2.5" or 3" in/out Muffler
Catalytic Converter if you choose to use one

FUEL SYSTEM PARTS (Black Hose  + Dark Silver Fittings)
------------
Qty = 1 RUS-632060 -Hose; -6an SS Proflex; 6ft.
Qty = 2 RUS-610021 -Hose End; Straight; -AN Hose to -6an Female
Qty = 2 RUS-613161 -Hose End; 90 Deg; -6an Hose to -6an Female
Qty = 1 RUS-613091 -Hose End; 45 Deg; -6an Hose to -6an Female
Qty = 1 RUS-660271 -Plug; -6an
Qty = 2 RUS-660351 -Coupler; -6an Male to -6an Male
Qty = 2 RUS-661771 -Reducer; -8an Male to -6an Male
Qty = 1 RUS-651040 -O Rings; -6an
Qty = 1 RUS-651050 -O Rings; -8an
Qty = 1 EAR-991945ERL -Adapter for top of Honda Fuel Filter to -6an Male
Qty = 1 AEI-13109 -Aeromotive A1000-6 FPR
Qty = 1 RUS-671570 -Assembly Lube and Thread Sealant Kit (optional)
Qty = 1 RUS-610021 -Hose End; Straight; -6an Hose to -6an Female
Qty = 1 RUS-660561 -Tube Nut; -4an
Qty = 1 RUS-660641 -Tube Sleeve; -4an
Qty = 1 RUS-661761 -Reducer; -6an Male to -4an Male

IF REMOVING POWER STEERING (With no A/C)
-------------
EP3 Idler pulley/bracket
Manual Steering rack, Or Loop P/S rack
K24 = 52" Serpentine Belt
K20 = 50.5" Serpentine Belt

IF KEEPING POWER STEERING (No A/C - With a current P/S rack)
-------------
K20 PS Pump
Jackson Racing Pulley - P/N: 052-154 (This will clear an EG hood with K20 swap, no hole...only cutting.)
52" Serpentine Belt(only for K20 - K24 = Unknown?)
02-04 RSX High pressure hose
3/8" I.D. hose
Oil cooler from Perma-Cool Industries P/N:1007 (for P/S fluid return line)

Fluids Needed:
-------
Power Steering Fluid - 2 Bottles
DOT3/DOT4 Brake fluid - 2 Bottles
Coolant 50/50 Mix - 2 Bottles(3 to be safe/cover leaking or spillage)
MTF - 3 Bottles
OIL - 6 Quarts

Most, if not all, parts above can be purchased through us. Please contact us for pricing/availability. Make us your one-stop-shop for your necessary engine swap parts!!