Standard clip, Velcro edge & how it attaches to your table

Instructions to apply table skirting:

• Lay your tablecloth over the top of the table (it should be big enough to allow some overhang)
• Attach ONE CLIP every 12 INCHES along the edge of the table (OVER or ON TOP OF your tablecloth overhang) with the flat velcro side of the clip facing the outside of the table (facing you)
• Now you are ready to attach the table skirt
  
• Hold the table skirt at the top along the velcro strip
• Start at the back corner of the table edge and coming around the front of the table, stick the velcro strip of the skirting to the velcro on the flat edge of each clip pulling tightly enough so that it does not leave a gap or sag.
• Work your way around the table clipping the velcro together each 12 inches until complete.
• If you have any extra when you come to the end you can simply tuck it under and attach as shown above
  
• When your event is complete it can be removed very quickly by gently pulling the velcro of the skirt away from the velcro of the clip starting at the back edge and working across the front
• As you remove it BE SURE TO FOLD IT neatly at 12 inch intervals when you remove it from the clip
• It is best stored on our table skirting hangers (available in our eBay store IMPERIAL TEXTILE). This will keep it from wrinkling and ready to be used again with no need to press or iron it.
• If it became soiled during use it can be washed on the most gentle cycle cool water and dry on little to NO heat. Remove promptly and hang.
  
• We recommend placing the clips into a storage bag and keeping them on or with the skirting hanger
• Use the guide shown to help determine the size of skirting that you need to fit your table

Click this link to our eBay store for any of the colors or styles of Table Skirting

Or to enlarge the fit chart shown above as it is in each skirting listing: