HOW TO RETRIEVE CODE FOR GENIE INTELLICODE GARAGE DOOR OPENERS

Use a phillips screwdriver to loosen screws in light cover, then let light cover hang down. you will see a black switch just left of the 1st light bulb press that black switch in, and let it pop back out.  Now there should be a red led flashing light , until you hit the button on your transmitter. After you have hit the button on the transmitter it should be a solid red color, and the next time you hit the button on the transmitter it should raise your garage doors. If, this works you can now screw the screws back in light cover.

MULTIPLE DOORS :

If both doors have lost the code you then should press both black switches on both garage door openers, and the red led light should flash before you press the transmitter button. If everything was done correctly the led should be a solid red color, press button on transmitter , now both garage doors should work. If both doors are working reinstall screws in light cover, and your done.

Your Garage Door(s) should be working now!

If you like this review please vote for it.