There are many wonderful fragrance lampes on the market today. The basic set up for the lampes is primarily the same.  These are the set-up instructions for Scentier Lampes.

Fragrance Lampe Set Up Instructions...

1. Set your Scentier™ Lampe on a level, stable surface away from any heat or flammable objects Remove the open/vented shade and solid cap.

2. Fill your Scentier™ Lampe approximately 2/3’s full with Lampe Parfum using funnel cap provided. Dry Lampe Carefully!

3. Insert the burner/wick into your Scentier™ Lampe. Carefully check to make sure burner/wick is fully inserted into Lampe neck.

4. The first time you use your Scentier™ replace the solid cap and allow the burner/wick to absorb fragrance for 20 minutes. Light the burner, leaving flame to burn for 2 minutes.

5. Blow out the flame. Your Scentier™ Lampe is now operating. Replace the open/vented shade over the burner. 25 to 45 minutes operating is sufficient for 300 sq. feet.

6. To stop your Scentier™ Lampe remove the open/vented shade from the burner. Replace the solid cap on burner. Replace open/vented shade on solid cap.

We hope you found this guide by Treasure Beyond Measure helpful.  If so, please vote below.

Click here to view all Treasure Beyond Measure Guides.