( 
)
Dodge 69 70 Super Bee emblems
Differences of the 4 "BEE" emblems. The only actual BEE emblems are on the front and back of the 69 and 70 Super Bees. All 4 are different. The 68 and 71 Super Bees only used BEE decals.
All 4 of these look the same from the front. It's the back of them where the difference is. They all measure about 3.75" wide.
1969 Grille BEE - Chrysler Part Number 2949303. This has the largest pins of them all, and also has 3 edges, or "fins" if you will on the lower section to hold the emblem into the vertical rows of the 69 Coronet grille. The back is flat so it is a fair choice for custom application also.
1969 Rear BEE - Chrysler Part Number 2964635. This has 2 shorter pins on the back. Either this one or the 1970 rear BEE is the best to use on custom applications like the tailgate of the Rumble Bee truck due to being flat on the back and having small standard pins.
1970 Hood BEE - Chrysler Part Number 2998065. This has 2 pins on the back, and is contoured for the hood of the 70 Coronet. It is thicker on both ends and angles in towards the middle from both ends.
1970 Rear BEE - Chrysler Part Number 3444654. This has 2 pins on the back, and is also flat. Either this one or the 1969 rear BEE is the best to use on custom applications like the tailgate of the Rumble Bee truck due to being flat on the back and having small standard pins.
Thanks for reading my guide. If it was helpful please vote below. Rich
Also see my other guides ..
Guide created: 06/26/06 (updated 03/18/12)
Thank you for voting. If your vote meets our 
cg~~_6.JPG?set_id=89040003C1)
P+ROvg~~_6.JPG?set_id=89040003C1)
