Instructions for applying One'n Only Colorfix by Jheri Redding. Instructions are also provided inside box in English, French, and Spanish. Please read all directions and precautions before using to insure a successful outcome.

One'n Only Color Fix

• Removes unwanted permanent hair color
• Allows color correction to specific areas     
• Designed for full or slight color corrections 

Full Color Correction:

1. Apply to dry hair
2. Mix equal parts of One'n Only Colorfix Part 1 Color Reducer and Part 2 Conditioning Catalyst in tint bowl or an applicator bottle. (Mix as much as will be needed for the density and length of hair that requires correction.) Wearing gloves and using a tint brush, apply quickly and evenly to the hair. If mixed in an applicator bottle, shake vigorously until mixed thoroughly ( 45 seconds to 1 minute). Gently work through the hair to ensure even penetration. After mixing Part 1 Color Reducer and Part 2 Conditioning Catalyst, use as quickly as possible, since the activity of the mixture decreases in time.
3. Cover loosely with a plastic processing cap, and process up to 20 minutes. Strand test frequently. Low warm dryer heat may be used to speed processing time.
4. Rinse hair for 3 to 5 minutes and shampoo. If sufficient color is not removed, repeat Steps 2 and 3 (this may be done on damp, towel-dried hair). Depending on the condition of the scalp and hair, do not repeat this process more than 2 to 3 times.
5. When desired level of color removal has been achieved, apply Processing Lotion for 5 minutes. (Due to the nature of dye molecules, it is possible that hair may redarken to an unacceptable level. If it does, repeat Steps 2through 4 on damp hair, until sufficient color is removed).
6. Rinse well. Dry hair with a warm heat setting. ( A hot setting may cause scalp irritation.) You may now proceed with your color application, if performing a full color corrective service.

For Slight Color Correction:

(For lighten hair color that has gone too dark or ashen)

1. Mix 1/4 oz. Part 1 Color Reducer + 1/4 oz. Part 2 Conditioning Catalyst + 1 oz. shampoo.
2. Wearing gloves, apply to damp, towel-dried hair. Apply only to the areas of the hair that require lightening, and work into a lather. To determine timing, take a strand test frequently.
3. When the desired shade has been reached, rinse thoroughly and shampoo.

Tips For Successful Color Correction:

• Always strand test color formulas to be used prior to application. Remember, porous hair will absorb colors more quickly and the resulting hair color may be slightly darker. You may need to formulate 1 to 2 levels lighter than your desired result.
• Always use a low pH conditioner after an application of Colorfix. This help protect the hair, and to return it to a more normal state.
• Colorfix is developed to remove oxidative dyes. Since most semipermanent colors are a combination of direct dyes and oxidative dyes, Colorfix may only partially remove these.

Carol's Beauty Supply