Softub is incredibly durable

A Softub is built to provide years of enjoyment in all climates and in any location.

•    For strength, tub walls are constructed using Softub's patented Polybond technology.
•    The self-contained plumbing system is protected inside the tub wall.
•    5 year limited warranty.
•    The exterior of the Softub is upholstered in LeatherTex, a marine grade vinyl that is specifically formulated for outdoor use.

Softub is affordable

The Softub hot tub's affordable price includes the Hydromate Power Pak, the tub unit, and the insulted bi-fold lid - everything you need to begin enjoying your Softub.

•    No hidden costs.
•    Self-contained design requires no special plumbing connections.
•    No special site preparations or electrical expense is required (Just roll it into your backyard!)
•    Long term heating costs are much lower compared to an average acrylic hot tub.

Efficient Heating system keeps costs low

The Softub was designed to be energy efficient in any climate. From Toronto to Whitehorse, there's no problem!

•    Polybond technology ensures that the Softub retains heat even in the coldest climate.
•    The patented heat recovery system heats the water efficiently averaging only $5.00 per month for a climate with an average 18°c temperature.
•    Softub requires just 2 kw hours of electricity per day to stay 40°c (104°F) and ready to use.

Softub is portable. Even take it up to your cottage

A Softub is a full-featured tub that sets up almost anywhere in minutes. Enjoy it indoors, outdoors, on decks or patios, at a vacation home, or anywhere you want luxury and hot water fun.

•  Unique design allows the Softub to easily roll anywhere.
•  Lightweight design allows infinite location choices.
•  No extensive and expensive site preparation required.
•  No plumbing is necessary.
•  Plugs into any standard 110V electrical outlet.

Installation is easy as 1, 2, 3

Installation of a Softub takes under one hour with no special plumping or electrical modifications required.

1. Roll it into your desired location

Simply roll your Softub inside its original packaging to wherever you prefer. If you're trying to get it into a tight spot, the Softub will fit through any standard door and can be squeezed about 6 inches for a really tight spot. Once in your desired location, set the Softub down, place the lid on, adjust straps, and place the Hydromate motor next to the tub.

2. Install the Hydromate motor

Connect the Hydromate motor to your Softub using the hose clamps and connect your hose to the motor. Run for 3-5 minutes to clear the hose.

3. Finish preparation of your tub

You're almost done! Smooth out the wrinkles on the bottom with 1-2 inches of water in the tub, add essential chemicals (e.g Chrlorine or Bromine), continue to fill tub smoothing out any wrinkles, check hose connections for any leaks, install vinyl cover and finally set your tub to the desired temperature.

That's it! Setting up a Softub is incredibly simple and should not take more then one hour (plus some extra time for filling the tub with water.) You can reference your owners manual for full instructions on setting up the Softub.