Supplies:

. Bubble (blister). Glue. Custom Card. Figure. Paper Weight (equivalent). Clear Tape (hold guns). Dry Clean Area. 8 Hours Cure Time.

There are many techniques used to glue on a Bubble (blister) to your custom card. Some people use clamps, Wood cut to the shape and size of the bubble, or placing paper weights (or something similar) on the bubble. In this Tutorial we'll cover the paper weight concept.

1. ACCESSORIES: Gather all Guns, Rifles, accessories and tape them on to the inside of the bubble in the position you like best. I use Scotch clear 1/2 tape to hold them down. It's very clear and thin. Target $1.50 (or local retail or art store

2. FIGURE: Place figure in the position you want it to be. Position arms, legs, head as needed.

3. GLUE: You can use almost any type of glue on the bubbles. I like using "ProBond Model & Hobby Cement" it bonds well and dries clear. You can also use any model kit type of glue. Apply on the inside blister edge (flange). Don't ad to much or the glue will spread out once you ad the weight to it. Place in position desired, use your finger on the outside part of the edge (flange) to spread the glue between the bubble and the card. Target $2.00 (or local retail or art store)

4. Clips. Sometimes bubble edges are warped. So you need to press down on many section to glue down. Hair clips for that matter. Top portion needs to be shaped like a finger pressing down. Look at pictures.