Attach a Tag in 3 Easy Steps:

1.  Set an eyelet in your paper.

2.  Load Tagger Tails in Top of Gun.  Carefully remove needle cover and poke through the tag and eyelet.  (Pierce epoxy tags with needle or place through hole in any charm).

3.  Push needle through paper and squeeze trigger.

Troubleshooting: 

• When you pull the trigger on the Paper Tagger, try doing it slowly, easing the tail through the needle.  Another trick we do is hold the tagger gun sideways when we pull the trigger so we can see the tagger tail go through the slot in the needle-this way you can see if you need to ease the tail through.
• It just seems that if you pull the tail really quickly, the tagger tail tends to break, so just try pulling it slowly.
• If by chance your Paper Tagger jams with a tagger tail in the needle, (A) you can remove the needle by turning the white lever up.  (B) Needle pulls out.  A pliers may be needed to remove the needle.
• Always replace the cover for safety.